1 Pc Hubcentric Wheel Spacers Adapters Adapter 5x5 5x127 2.00 Inch Thick M14x1.5 14x1.5 Thread Stud Fits Jeep Gladiator | 2011+ Grand Cherokee | 2018+ Wrangler
- Spacers are manufactured with same thread; hub bore and lug hex as your vehicle’s original equipment. Allowing use of your vehicle’s original lugs and lug wrench.
- Precision machined 6061-T6 Aircraft Grade Aluminum spacers / adapters with heat treated, hardened Grade 12.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires.
- Hub Centric Spacers provide a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. These Spacers are for wheel and vehicle hub diameters of 71.50mm only.
- Always check fitment before purchase.
Vehicle Bolt Pattern: 5x5.0 Wheel Bolt Pattern: 5x5.0 |
Vehicle Hub Bore: 71.50mm Wheel Center Bore: 71.50mm |
Stud Thread: M14x1.5
|
Thicknesses Available: 2.00"
|
6060-T6 aluminum alloyOur spacers are made from FORGED aircraft quality 6060-T6 aluminum alloy. Each spacer is anodized black which significantly enhances the hardness and corrosion resistance. |
12.9 class studsOur wheel studs are made to SAE 12.9 standard.
|
CNC automatic processingOur adapters are produced using CNC lathes and milling machines. CNC ensures a precise fit to your vehicle hub eliminating possible vibration.
|
Installation Advice:1. Clean the studs thoroughly and remove excess dirt, oil, grease etc. 2. Slide spacer onto the vehicle studs. The Center bore of the spacer will fit tightly onto the vehicle hub. 3. Thread the supplied lug nuts onto the studs with the TAPERED end facing the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern with a torque wrench as per the manufacturer specifications 4. Slide the wheel onto the spacer. The wheel should fit tightly onto the adapter hub |
Vehicle Thread | M14x1.5 |
---|---|
Vehicle Bolt Pattern | 5 x 127mm (5 x 5.00) |
Wheel Bolt Pattern | 5 x 127mm (5 x 5.00) |
ID (Vehicle Side) | 71.50mm |
OD (Wheel Side) | 71.50mm |
Adapter Diameter | 164mm |
Material | 6061-T6 Aluminum |
Thickness | 2.00 in |
Finish | Black Anodized |
Included | OE Bulge Acorn Lug Nuts |
Type | Single Drill - Hub Centric |
EA | 1 |
Inner Pack | 2 |
Case | 10 |