1 Pc Hubcentric Wheel Spacers Adapters Adapter 5x5 5x127 2.00 Inch Thick 1/2"-20 Thread Stud Fits 2006-10 Jeep Commander | 1993-2010 Grand Cherokee | 2007-18 Wrangler
- Specs: Thickness : 2.00 Inch | Forged 6061 T6 Aluminum | Wheel Bolt Pattern : 5x5 5x127 | Vehicle Bolt Pattern : 5x5 5x127 | ID (Vehicle) : 71.50mm | OD (Wheel) : 71.50mm | Thread: 1/2"-20 | Color: Black | 1 Pc
- Always use SHOP BY VEHICLE to validate product fitment to your vehicle. This item fits Jeep 2006-10 Commander | 1993-10 Grand Cherokee | 2007-17 Wrangler | 2018 Wrangler JK
- Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift lowering kits and wider, larger, or high traction tires.
- Hub Centric Spacer provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This spacer is for a wheel hub diameter of 71.50mm only
- Our spacers are made from FORGED aircraft quality 6061-T6 aluminum alloy. Each spacer is anodized black which significantly enhances the hardness and corrosion resistance. Studs are SAE 10.9. CNC lathes and milling machines ensures a precise fit to your vehicle hub eliminating possible vibration.
 |
 |
 |
 |
Bolt Pattern:5x5 (5x127mm) |
Center bore:71.5mm |
Thread Pitch:1/2" |
Thickness:2.00" |
 |
 |
 |
6060-T6 aluminum alloyOur spacers are made from FORGED aircraft quality 6060-T6 aluminum alloy. Each spacer is anodized black which significantly enhances the hardness and corrosion resistance. |
12.9 class studsOur wheel studs are made to SAE 12.9 standard.
|
CNC automatic processingOur adapters are produced using CNC lathes and milling machines. CNC ensures a precise fit to your vehicle hub eliminating possible vibration.
|
 |
Installation Advice:1. Clean the studs thoroughly and remove excess dirt, oil, grease etc. 2. Slide spacer onto the vehicle studs. The Center bore of the spacer will fit tightly onto the vehicle hub. 3. Thread the supplied lug nuts onto the studs with the TAPERED end facing the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern with a torque wrench as per the manufacturer specifications 4. Slide the wheel onto the spacer. The wheel should fit tightly onto the adapter hub |
| Vehicle Thread | 1/2 UNF |
|---|---|
| Vehicle Bolt Pattern | 5 x 127mm (5 x 5.00) |
| Wheel Bolt Pattern | 5 x 127mm (5 x 5.00) |
| Stud Thread | 1/2 UNF |
| ID (Vehicle Side) | 71.50mm |
| OD (Wheel Side) | 71.50mm |
| Adapter Diameter | 164mm |
| Material | 6061-T6 Aluminum |
| Thickness | 2.00 in |
| Finish | Black Anodized |
| Included | OE Bulge Acorn Lug Nuts |
| Type | Single Drill - Hub Centric |
| EA | 1 |
| Inner Pack | 2 |
| Case | 10 |
