100 Pcs M14x1.5 14x1.5 Thread Open End Bulge Acorn 21mm 0.84" Long Lug Nuts Zinc 3/4" 19mm Hex Fits 2001+ Silverado Sierra 2500 3500 Ford 2005+ F250 F350 2011+ Ram 2500 3500
- ❌ These Lug nuts are designed for AFTERMARKET wheels only. This lug may be the correct thread for your vehicle in many cases the lug seat is not large enough to create sufficient clamping force to safely install the OE wheel to your vehicle.
- Always use SHOP BY VEHICLE to validate product fitment to your vehicle. This item fits Chevrolet C2500 C3500 1988-2000 | K2500 K3500 1988-2000 | Silverado 1500 HD 2001-06 | Silverado 2500 HD 2001+ | Silverado 2001-06 | Silverado 3500 HD 2007+ | Ford Excursion 2003-05 | F-250 F-350 Super Duty 2003+ | GMC C2500 C3500 1988-2000 | K2500 K3500 1988-2000 | Sierra 1500 HD 2001-2006 | Sierra 2500 HD 2001+ | Sierra 3500 2001-06 | Sierra 3500 HD 2007+ | Ram 2500 2012+ | 3500 2011+
- 100 Pcs | 21mm 0.84" Long | M14x1.5 14x1.5 Thread | 3/4" 19mm | 60 Degrees Taper Conical Seat | Open End Bulge Acorn | Zinc Finish | 1 Piece Construction
- Designed In USA - 19mm Hex Open End lug nuts are specifically designed for aftermarket wheels. Open end lug nuts are used mainly with wheels which caps which cover the lug nuts. Meets or Exceeds OEM Factory Standards.
- Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish
In stock
SKU
881148Z
$0.42
100 Pcs M14x1.5 14x1.5 Thread Open End Bulge Acorn 21mm 0.84" Long Lug Nuts Zinc 3/4" 19mm Hex Fits 2001+ Silverado Sierra 2500 3500 Ford 2005+ F250 F350 2011+ Ram 2500 3500 is available to buy in increments of 100
Always Use SHOP BY VEHICLE to verify fitment
Compatible with the following vehicles:
|
|
Zinc Black
|
Specs: Height: 21mm (0.84") Width: 23mm (0.90") Hex: 19mm (3/4") |
Thread: M14x1.50 Seat: Acorn / Conical |
Packaging: Bulk
|
Product FeaturesDurable Steel Construction - Our lug nuts are made from high tensile steel for reliability and strength that meet and/or exceed factory load standards. engineered in the United States and back by decades of automotive aftermarket experience. |
|
 |
 |
 |
|
Seat Construction Seat is designed to ensure even distribution of the clamp Force. Seats are checked during the manufacturing process for correct angle and concentricity during and after the manufacturing process. |
Precision Threads Provides better thread engagement that withstands the rigors of daily on-the-road driving. Threads are checked during the manufacturing process and final inspection using Go/No Go gauges to ensure proper thread engagement |
Material & Finish During the manufacturing processes, goods are tested and inspected during each phase of the process. Finished goods are then subjected to a final inspection by our quality inspection team checking measurements, threads, finish, overall appearance, and packaging. Applied finishes are subjected to standard 48 Hour Salt Spray Test to ensure a lasting brilliant finish. |
| Lug | Nut |
|---|---|
| Vehicle Type | Car |
| Hex | 19mm (3/4") Hex |
| Vehicle Thread | M14x1.5 |
| Length | 0.84" |
| Shank | Conical Seat |
| Material | Steel |
| Style | OE Bulge Acorn |
| Finish | Zinc |
| Packaging | Bulk |
| EA | 1 |
| Inner Pack | 100 |
| Case | 600 |
