100 Pcs M12 x 1.25 12 x 1.25 Thread Open End Bulge Acorn 21mm 0.84" Long Lug Nuts Zinc 19mm 3/4" Fits Most Subaru Pass Cars | Nissan Pass Cars with Aftermarket Wheels
- ❌ These Lug nuts are designed for AFTERMARKET wheels only. This lug may be the correct thread for your vehicle in many cases the lug seat is not large enough to create enough clamping force to safely clamp the OE wheel to your vehicle.
- Always use SHOP BY VEHICLE to validate product fitment to your vehicle. This item fits Nissan 1974-75 240Z | 1975-78 260Z | 1979-83 280Z | 03-09 280ZX | 09-20 350Z | 1993+ 370Z |1999-01 Altima |1990-95 Altima EV | 09-14 Axess | 09-21 Cube | 11+ GT-R | 1981+ LEAF |1984-19 Maxima |1982-22 NX | 1983-92 Sentra | 07+ Stanza |14-19 Versa Versa Note | Subaru 13+ BRZ |16+ Crosstrek | 2016 Forester | 1993+ Impreza | 1990-94 Justy | 1990+ Legacy |1990-94 Loyale | 00+ Outback | 2013+ WRX STI
- 100 Pcs | 21mm 0.84" Long | 19mm 3/4" | 60 Degrees Taper Conical Seat | Open End Bulge Acorn | Zinc Finish | 1 Piece Construction
- Designed In USA - 19mm Hex Open End lug nuts are specifically designed for aftermarket wheels. Open end lug nuts are used mainly with wheels which caps which cover the lug nuts. Meets or Exceeds OEM Factory Standards.
- Cold forged carbon steel. High quality precise threads. Built to SAE Standards.
Always Use SHOP BY VEHICLE to verify fitment
Compatible with the following vehicles:
|
|
Zinc
|
Specs: Height: 21mm (0.84") Width: 23mm (0.90") Hex: 19mm (3/4") |
Thread: M12x1.25 Seat: Acorn / Conical |
Packaging: Bulk
|
Product FeaturesDurable Steel Construction - Our lug nuts are made from high tensile steel for reliability and strength that meet and/or exceed factory load standards. engineered in the United States and back by decades of automotive aftermarket experience. |
|
 |
 |
 |
|
Seat Construction Seat is designed to ensure even distribution of the clamp Force. Seats are checked during the manufacturing process for correct angle and concentricity during and after the manufacturing process. |
Precision Threads Provides better thread engagement that withstands the rigors of daily on-the-road driving. Threads are checked during the manufacturing process and final inspection using Go/No Go gauges to ensure proper thread engagement |
Material & Finish During the manufacturing processes, goods are tested and inspected during each phase of the process. Finished goods are then subjected to a final inspection by our quality inspection team checking measurements, threads, finish, overall appearance, and packaging. Applied finishes are subjected to standard 48 Hour Salt Spray Test to ensure a lasting brilliant finish. |
| Lug | Nut |
|---|---|
| Vehicle Type | Car |
| Hex | 19mm (3/4") Hex |
| Vehicle Thread | M12x1.25 |
| Length | 0.84" |
| Shank | Conical Seat |
| Material | Steel |
| Style | OE Bulge Acorn |
| Finish | Zinc |
| Packaging | Bulk |
| EA | 1 |
| Inner Pack | 100 |
| Case | 600 |
