24 Pcs M12 x 1.25 12 x 1.25 Thread Bulge Acorn 35mm 1.38" Long Lug Nuts Chrome 3/4" 19mm Hex Fits Nissan Titan (Non XD) with Aftermarket Wheels

  • ❌ These Lug nuts are designed for AFTERMARKET wheels. This lug may be the correct thread for your Toyota or Nissan vehicle but the lug seat may not match the OE Wheel which could cause a safety issue. Always check lug seat compatibility prior to purchase/installation.
  • Always use SHOP BY VEHICLE to validate product fitment to your vehicle. This item fits INFINITI 1997-2003 QX4, 2004-10 QX56 | Nissan 1985-86 720, 2005-15 Armada, 1998+, 1986-94 D21 Frontier 1987-2012 Pathfinder 2004 Pathfinder Armada 1995-97 Pickup 2004+ Titan (Non XD) 1987-88 Van 2000-15 Xterra | Suzuki 2009-12 Equador
  • 24 Pcs | M12 x 1.25 12 x 1.25 Thread | Type: Bulge Acorn | Length : 35mm 1.38" | Finish: Chrome | Hex: 3/4" 19mm | 2 Piece Construction
  • Designed In USA - 21mm Hex Bulge Acorn lug nuts are specifically designed for aftermarket wheels. Meets or Exceeds OEM Factory Standards.
  • Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish
In stock
24 Pcs M12 x 1.25 12 x 1.25 Thread Bulge Acorn 35mm 1.38" Long Lug Nuts Chrome 3/4" 19mm Hex Fits Nissan Titan (Non XD) with Aftermarket Wheels is available to buy in increments of 1


Always Use SHOP BY VEHICLE to verify fitment


Compatible with the following vehicles:

  • Nissan - 1985-86 720 | 2005-15 Armada| 1986-94 D21 | 1998-24 Frontier| 1987-12 Pathfinder | 2004-04 Pathfinder Armada | 1995-97 Pickup | 2004-23 TITAN | 1987-88 Van | 2000-15 Xterra
  • INFINITI - 1997-03 QX4 | 2004-10 QX56
  • Suzuki - 2009-12 Equator

View Colors Available:





Height: 35mm (1.38")

Width: 23mm (0.90")

Hex: 19mm (3/4")




Acorn / Conical


24 Pcs Per Kit

8 Kits Per Master




Product Features

Durable Steel Construction - Our lug nuts are made from high tensile steel for reliability and strength that meet and/or exceed factory load standards. 

engineered in the United States and back by decades of automotive aftermarket experience.

Seat Construction

Seat is designed to ensure even distribution of the clamp Force. Seats are checked during the manufacturing process for correct angle and concentricity during and after the manufacturing process.

Precision Threads

Provides better thread engagement that withstands the rigors of daily on-the-road driving. Threads are checked during the manufacturing process and final inspection using Go/No Go gauges to ensure proper thread engagement

Material & Finish

During the manufacturing processes, goods are tested and inspected during each phase of the process. Finished goods are then subjected to a final inspection by our quality inspection team checking measurements, threads, finish, overall appearance, and packaging. Applied finishes are subjected to standard 48 Hour Salt Spray Test to ensure a lasting brilliant finish.

More Information
Vehicle TypeCar
Hex19mm (3/4") Hex
Vehicle ThreadM12x1.25
ShankConical Seat
MaterialCarbon Steel
StyleBulge Acorn
Packaging6 Lug Kit